Schutzscheiben Für Desert-Locust-Vollschutzbrillen

19,99 $
SETUMFANG
  • Eine Ersatzschutzscheibe


Hinweis: Die farblosen und rauchglas Schutzscheiben stehen auf der APEL-Liste für zugelassene Schutzbrillensysteme des US-Militärs.


Hinweis: Militär- und Taktikrabatte stehen bei der Preisempfehlung des Herstellers zur Verfügung. Wenn Sie Fragen zu Sonderkonditionen haben, schreiben Sie eine Mail an customercare@revisionmilitary.com

MILITÄRISCHES VOLLSCHUTZBRILLEN-SYSTEM


Desert Locust

Schutzscheibe mit der Desert Locust-Vollschutzbrille kompatibel

Merkmale

OcuMax-Antibeschlagbeschichtung

Revisions OcuMax Plus-Beschichung wurde gemäß EN 166 getestet, hält nachweislich 10-20 Mal länger als Wettbewerbslösungen im Bereich Beschlagschutz, ist chemikalienbeständig und beugt Kratzern, Streifen und Schmiere vor.

Fototrope Schutzscheibenoption

Diese Schutzscheiben passen sich automatisch wechselhaften Lichtverhältnissen an – von farblos für Innen- oder Nachtanwendungen bis hin zu einer abgedunkelten Tönung bei grellem Licht.

Maximales Gesichtsfeld

Die präzise abgestimmte Rundung und die schlanke Gestellarchitektur maximieren das Gesichtsfeld für ungehinderte Sicht in schnelllebigen Szenarien.

Höchster Aufprallschutz

Auf die Übererfüllung strenger US- und internationaler Aufprallanforderungen für die Verwendung in militärischen und taktischen Einsätzen ausgelegt

Makellose Optik

Präzisionsgefertige Schutzscheiben für verzerrungsfreie Sicht

ROBUST UND LANGLEBIG

Unübersehbar auf die Härte von Kampfszenarien ausgelegt – das robuste Design, die äußerst aufprallsicheren Materialien, die flexible Stoßdämpfung und die reaktionsschnelle Leistung machen dieses Modell zu einer sehr widerstandsfähigen Lösung.

Technische Daten

Größen, Abmessungen und Farben
Verfügbare Größen
  • Einheitsgröße
Farboptionen
  • Farblos, rauchglas, gelb, kontrastverstärkend, zinnoberrot, kontrastverstärkend
NATO-Lagernummer (Stock Number) 10 Stück
  • Farblos („Clear”): 4240-01-547-6568
  • Rauchglas: 4240-01-547-6567

WARNINGS

BATLSKIN® HEAD PROTECTION SYSTEMS

For safety reasons, read this manual to ensure proper Head Protection System assembly and fit. A Head Protection System that is not properly fitted may result in serious injury or death due to ballistic, blunt force or blast impact.

HELMET FIT WARNINGS

  • A helmet that is not properly fitted to head may result in serious injury or death due to ballistic, blunt force or blast impact. 
  • A helmet that has been impacted must be replaced as soon as possible as it will no longer offer the same level of protection in the event of a second impact.

FRONT MOUNT WARNINGS

  • If front mount is not installed, all holes must be filled with bolts & t-nuts to maintain ballistic protection. Unfilled holes in the helmet shell may lead to serious injury or death. 
  • A damaged front mount may not hold headborne equipment in place securely. Unsecured headborne equipment may obstruct vision leading to serious injury or death.

RETENTION SYSTEM WARNINGS

  • Retention system strap anchors must be covered by the helmet liner at all times. 
  • Ensure helmet is secure on the head by adjusting retention straps securely and evenly so that the helmet is stable and level. 
  • Damage to the webbing, stitching, or hardware means the helmet may not remain securely on the head during use. Replace retention system immediately if damage occurs. Serious injury or death could occur due to an insecure helmet.

LINER WARNINGS

  • If the liner experiences any impact while being worn or the soldier experiences a concussion while wearing the helmet, the liner must be replaced. It will not provide the same impact protection for a second impact and serious injury or death could result if the liner is not replaced. 
  • Use only specified liner and retention system. Failure to do so may result in injury or death. 
  • Removing liner pads will compromise impact protection and may result in injury or death. 
  • Damage to the liner comfort foam will compromise the impact protection offered by the helmet. Replace the liner if foam is exposed, damaged or missing. 
  • Using the wrong size helmet may reduce protection, affect stability of the helmet, cause physical and thermal discomfort, limit head range of motion or change compatibility with other equipment. 
  • Liner must be flush with helmet trim and retention system hardware must be covered by the liner. Failure to do this may allow the hardware to come into contact with the user’s head and could lead to injury or death.

MODULAR SUSPENSION SYSTEM WARNINGS

  • If the liner experiences any significant impact event while being worn or the soldier experiences a concussion while wearing the helmet, the liner must be replaced. It will not provide the same impact protection for a second impact and serious injury or death could result.
  • Removing parts of the liner will compromise protection and may result in injury or death.
  • Damage to the comfort foam in the brow pad or around the fit band could reduce the protection offered by the helmet. Replace brow pad and/or fit band if foam is exposed, damaged or missing.
  • Using the wrong size helmet may reduce protection, affect stability of the helmet, cause physical and thermal discomfort, limit head range of motion or change compatibility with other equipment. Proper fit is essential.
  • Brow pad must be flush with helmet trim and must cover the retention system hardware. Failure to line the brow pad up in this manner may allow the hardware or helmet brim to come into contact with the user’s head during impact and could lead to injury or death.
  • Ensure helmet is secure on the head by adjusting retention straps securely and evenly so that the helmet is stable and level. 
  • Damage to the webbing, stitching, or hardware means the helmet may not remain securely on the head during use. Replace retention system immediately if damage occurs. Serious injury or death could occur due to an unsecure helmet.

MANDIBLE GUARD WARNINGS

  • The mandible guard must be properly secured to the helmet to provide protection during an impact. If not properly secured, injury or death may result during impact. 
  • A mandible guard that has experienced any impact while being worn or if a soldier experiences a concussion while wearing the mandible, the mandible must be replaced. It will not provide the same impact protection for a second impact and serious injury or death could result if the liner is not replaced.

BALLISTIC VISOR WARNINGS

  • A visor that is not properly fitted to the helmet may result in serious injury or death in case of ballistic, blunt force, or blast impact.
  • A visor that has been impacted during a severe impact event must be replaced as soon as possible as it will no longer offer the same level of protection in the event of a second impact.
  • Damage to the visor arm may render the device incapable of supporting the visor. Do not use if arm is damaged as it may compromise protection and could result in injury or death. 
  • Do not use this visor for protection against laser light unless using a laser specialty lens. Laser light can cause permanent damage to eyes even if wearing this visor.
  • Do not use for chemical splash or chemical vapor exposure protection.
  • Do not use ammonia, alkaline cleaners, abrasive cleaning compounds or solvents when cleaning visor. Use of certain sol¬vents may lower the impact resistance of the visor.


SENSYS COMCENTR2™ TACTICAL HEADSET SYSTEM

For safety reasons, ensure proper assembly and fit of the ComCentr2 Tactical Headset System. A ComCentr2 headset that is not properly fitted may result in Noise-Induced Hearing Loss (NIHL) due to unprotected exposure to high noise levels.

HEADSET FIT WARNINGS

  • A ComCentr2 headset that is incorrectly worn properly on the head will not provide the correct clamping pressure required to block out harmful noises. 
  • Ear cups that are not properly sealed to the user’s ears will reduce the headset’s ability to reduce harmful noise, lowering the stated protection level. 
  • Ear cups that are incorrectly sealed will allow noise to leak into the ear cavity, lowering in the stated protection level.

Note: A gentle press on the outside of the ear cup will allow the feeling of air pressurization. Any feeling of air escaping around the outside of the ear cushion seal indicates a badly fitted headset. In the case of a bad seal, quickly leave and high noise environment, remove the headset and consult the user manual for setup.

HEADSET OPERATION WARNINGS

  • The ComCentr2 headset is supplied with a Communications Limiter allowing only communications below 105dB SPL to pass to the ear before the sound is compressed. This Limiter is designed to protect the user from equipment malfunction and/or Electron Magnetic Pulses. The Communications Limiter cannot be used for dosage management, and the continued listening to music at the level of the limiter for greater than 1 hour will exceed the noise dosage and potentially cause Noise-Induced Hearing Loss. 
  • The ComCentr2 headset is tested under ANSI S12 (U.S.) regulation and EN352 (EU) which provides a general estimation of the noise environment that this protector can be used. Any questions regarding whether the protection level is appropriate for the environment you are exposed to, please address your Health & Safety Coordinator or management for clarification.
Kompatibilität
  1. Kompatibel mit der Desert Locust-Vollschutzbrille
  2. Kompatibel mit der Asian Locust-Vollschutzbrille
  3. Kompatibel mit Rx-Träger
Tests und Anforderungen
  • ÜBERTRIFFT DIE US-ANFORDERUNGEN FÜR BALLISTITSCHEN AUFPRALLSCHUTZ MILITÄRISCHER (MIL-PRF-32432 (GL))
  • ÜBERTRIFFT DIE BALLISTISCHEN UND OPTISCHEN ANFORDERUNGEN LAUT ANSI Z87.1-2010.
  • CE-ZERTIFIZIERT GEMÄSS EN 166, EN 170 UND EN 172
© 2017 Revision Military. All Rights Reserved